SpringBolt Concrete Anchor When Anchor Failure Is - NOT - An Option |  Call For Info 360-941-0269 |  |
Tests / Certs and Siesmic Data Progressive Engineering Inc. ASTM E4888 Fastener Tenstion Testing for the 6” model Springbolt Concrete Anchor Objective: To determine the tensile capacity of the anchors when embedded in concrete. This data is to be used separately for calculating the allowable strength of the anchor system in accordance with ICC-ES AC446 * see potentially applicable notes at bottom of this page Progressive Engineering Inc. PER-17114 Product Evaluation Report Objective: Provides tensile and shear testing results based on a variety of considerations including product measurements, embedment depth, concrete strength, cracked vs uncracked concrete. * see potentially applicable notes at bottom of this page Materials Testing & Consulting, Inc. MTC-Report 2018.10.22 Objective: Provide pull-testing results on the 8” model Springbolt Concrete Anchor Quantum Consulting Engineers, Inc Calculated Design Loads in accordance with ACI318-14 Objective: Provides tensile and shear testing results based on a variety of considerations including product measurements, embedment depth, concrete strength, cracked vs uncracked concrete. 6″ – 8″ Quantum Consulting Engineers, Inc Calculated Design Loads in accordance with ACI318-14 Objective: Provides tensile and shear testing results based on a variety of considerations including product measurements, embedment depth, concrete strength, cracked vs uncracked concrete. 10″ – 12″ United States Patent – Cover Page * The report reflects 2.42″ embedment, however with the blue end cap the actual embedment depth is 2.5″. |
WEBSITES BY COMPUMATTER